Five Minutes Work to Replace Your iPhone 6 Plus Broken Screen

http://www.etradesupply.com/blog/minutes-work-replace-iphone-6-broken-screen/

Use this coupon code: ETSO4BG0 for extra discounts

Since the screen of iPhone 6 plus has been enlarged to 5.5 inches, the possibility of breaking it has also been enlarged. If unfortunately you broke your iPhone 6 plus screen, official repair will cost you up to a week exclude the time you make the appointment. So if you are skilled enough, replacing the iPhone 6 plus broken screen yourself is a better choice. Here we will walk you through a simple 5 minutes DIY repair guide for replacing the broken iPhone 6 plus broken screen.

Tools Needed:
Pentalobe Screwdriver
Philip Screwdriver
Tweezers
Suction Cup Tool
Case Opening Tool
iPhone 6 Plus Disassembly
Step 1. Shut down your iPhone 6 plus before you do anything else. (Make sure you’ve done this before the disassembly begins, or you may cause short circuit of the inner parts of the phone which may harm the motherboard)
shut down the iPhone 6 plus
Step 2. Undo 2 screws on the bottom with the help of the Pentalobe Screwdriver. (We recommend you to use a magnetic pad for putting those screws in case losing them)
Undo 2 screws on the bottom of iPhone 6 plus
Step 3. Stick the suction cup on the bottom of the phone and then pull out the broken screen. (If your screen has already shattered badly, use transparent adhesive tape to cover the surface of the screen to avoid any further damage)
Stick the suction cup on the bottom of the iPhone 6 plus and then pull out the broken screen
Step 4. Undo 5 screws holding the metal cover, then take the metal cover out.
Undo 5 screws holding the iPhone 6 plus metal cover
take the iPhone 6 plus metal cover out
Step 5. Disconnect the digitizer flex cable connector, LCD display flex cable connector, front facing camera connector and home button flex cable connector. (If what you get is the iPhone 6 plus digitizer and LCD screen assembly with home button, fame and front facing camera, then you just need to put the new one on)
Disconnect the digitizer flex cable connector, LCD display flex cable connector, front facing camera connector and home button flex cable connector
Step 6. Undo the 3 screws holding the home button retaining bracket then pick it up.
Undo the 3 screws holding the home button retaining bracket
pick up iPhone 6 plus home button retaining bracket
Step 7. Pry up the home button flex cable connector then remove the home button.
Pry up the iPhone 6 plus home button flex cable connector
 remove the iPhone 6 plus home button
Step 8. Undo the 3 screws that holding the metal cover on the ear speaker.
Undo the 3 screws that holding the metal cover on the iPhone 6 plus ear speaker
Step 9. Take out the retaining bracket, ear speaker and front facing camera.
Take out the iPhone 6 plus retaining bracket
Take out the iPhone 6 plus ear speaker
Take out the iPhone 6 plus front facing camera
Step 10. Undo the 7 screws that locking the LCD metal plate.
Undo the 7 screws that locking the iPhone 6 plus LCD metal plate
Undo the 7 screws that locking the iPhone 6 plus LCD metal plate
Undo the 7 screws that locking the iPhone 6 plus LCD metal plate
Step 11. Pry up the LCD back plate connector.
Pry up the iPhone 6 plus LCD back plate connector
Step 12. Replace your broken screen with the new one.
Replace your broken iPhone 6 plus screen with the new one
Note: We strongly recommend you to test the function of the new iPhone 6 plus digitizer and LCD screen assembly before you install it on. If you unfortunately get the defective part, you could ask your supplier to exchange for a new one.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s