How to reassemble iPad mini 3

http://www.etradesupply.com/blog/how-to-reassemble-ipad-mini-3/

use this coupon code: ETS7H4XW for extra discounts on www.etradesupply.com for order over $50, and it won’t be expire until Feb. 10th, 2015.

After tearing down the iPad mini 3, we have known that it is easy to replace iPad mini 3 broken screens. Here we show you how to reassemble iPad mini 3 step by step.

 how to reassemble ipad mini 3

Tools Needed:

A pair of Tweezers

PH00 Philips Screwdriver

1.Insert the side key and power button, then fasten 2 screws into the bracket separately.
Insert the side key and power button, then fasten 2 screws into the bracket separately.
2.Insert the earphone jack.
Insert the earphone jack.
3.Insert the charging port and put the logic board on the back housing. (Notice: pay attention to the side key flex cable, earphone jack flex cable and the battery flex cable.)
Insert the charging port and put the logic board on the back housing.
4.Insert the 2 loud speaker modules to the bottom of the back housing.

insert the 2 loud speaker modules to the bottom of the back housing.

5.Tweeze 6 screws to fix the charging port.

Tweeze 6 screws to fix the charging port.
6.Connect the senor flex cable to the earphone jack flex cable.

Connect the senor flex cable to the earphone jack flex cable.
7.Connect the earphone jack flex cable, side key flex cable and battery flex cable to the mother board. Adhere the front facing camera to the back housing and connect it to mother board.
Connect the earphone jack flex cable, side key flex cable and battery flex cable to the mother board. Adhere the front facing camera to the back housing and connect it to mother board.
8.Fasten the mother board with a screw into the back housing.

Fasten the mother board with a screw into the back housing.
9.Put the antenna bracket on loud speaker module and fix them with 7 screws.
Put the antenna bracket on louder speaker module and fix them with 7 screws.
10.Connect the antennas to the mother board.

Connect the antennas to the mother board.
11.Connect the digitizer flex cable, LCD flex cable and home button flex cable to the mother board.
Connect the digitizer flex cable, LCD flex cable and home button flex cable to the mother board.
12.Put the metal bracket on the mother board and fasten 4 screws to fix it.
Put the metal bracket on the mother board and fasten 4 screws to fix it.
13.Fasten 7 screws to fix the metal bracket.
Fasten 7 screws to fix the metal bracket.
14.Fasten 4 screws to fix the LCD bracket.
Fasten 4 screws to fix the LCD bracket.

15.Adhere the iPad mini 3 glass lens to the rear housing with strong adhesive. Then the reassembly is done.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s